
The 73A Series Portable Power Station comes in two models of 1000W and 2000W with pure sine wave output. Peak power is up to 2000 W and 4000 W, respectively. Output efficiency is at least 87%. Supports switching between 110/220 VAC. current and 50/60 Hz. Waveform distortion is less than 5%.
The 73A Series Portable Power Station comes in two models of 1000W and 2000W with pure sine wave output. Peak power is up to 2000 W and 4000 W, respectively. Output efficiency is at least 87%. Supports switching between 110/220 VAC. current and 50/60 Hz. Waveform distortion is less than 5%.
Device dimensions: 400 × 210 × 275 mm. Net weight - 6.5 kg. Battery compartment: 290 x 175 x 175 mm. The device allows you to independently install 12 V or 24 V lithium batteries. It supports DC charging via the XT90 connector, as well as recharging from solar panels via an MPPT controller.
The device is equipped with 3 AC outlets, 4 USB fast charging ports 2A+2C, and a 3W LED flashlight. There is an LCD display to display charge level, DC and AC voltage, temperature and error codes. Built-in multi-level protection against overvoltage, undervoltage, overload, short circuit and overheating. At a temperature of 70 °C the output is automatically switched off. Cooling is provided by two smart fans.
On the case there are separate buttons for turning on the general power, AC sockets, USB ports and LED backlighting. Consumption in standby mode is no more than 30 µA. The device is intended for operation at temperatures from –20 °C to +60 °C, storage – from –40 °C to +70 °C, operating altitude – up to 3000 m above sea level.
The design allows for easy assembly and disassembly. Internal terminals and polyurethane foam inserts securely fix the battery. The kit is suitable for camping, emergency power supply and backup power for low-power equipment. The kit includes a complete troubleshooting guide, making operation and maintenance as simple as possible.