Products
CNTB10 Series High Voltage Reactive Power Compensation Device
This series of automatic high voltage reactive power compensation devices divides capacitors into several groups of equal or unequal capacitance in accordance with the total amount of reactive power to be compensated and according to specified requirements.
Description
marker
Product Description
This series of automatic high voltage reactive power compensation devices divides capacitors into several groups of equal or unequal capacitance in accordance with the total amount of reactive power to be compensated and according to specified requirements. Vacuum switches or specialized switching vacuum contactors are used as switching devices. The microprocessor control system monitors and collects network voltage and current signals, automatically calculates the required amount of reactive power compensation, flexibly and conveniently controls the amount of connected capacitor capacity, fully increases the efficiency of using high-voltage parallel capacitor installations, maintains optimal voltage quality and reactive power level in the network, and reduces losses.
This product complies with GB50227-1995 Parallel Capacitor Arrangement Design Specification and DL/T604 Parallel Capacitor Arrangement High Voltage Ordering Specification.
contact us
Related Popular Products
High Voltage Vacuum Switch with Permanent Magnets for Switching Capacitors ZN3A-ZNT3
This series of high voltage magnetic drive vacuum circuit breakers is equipped with high quality vacuum arc chutes, as well as advanced and reliable bistable magnetic drive and intelligent controller.
Low Voltage High Speed Vacuum Contactor CNF Series
Vacuum circuit breakers of the CNF series are designed for shunt protection of semiconductor electronic devices. The main contacts of the bypass switch are connected in parallel with the semiconductor device.
Indoor Vacuum Load Switch FZ(R)N35-40.5 Series
Combined device - indoor high voltage vacuum load switch with fuse (hereinafter referred to as combined device) is a switching equipment specially designed for new energy fields such as wind power and photovoltaic power.
Portable power stations 1
The 73A Series Portable Power Station comes in two models of 1000W and 2000W with pure sine wave output. Peak power is up to 2000 W and 4000 W, respectively. Output efficiency is at least 87%. Supports switching between 110/220 VAC. current and 50/60 Hz. Waveform distortion is less than 5%.
GW4-126 Series Outdoor High Voltage Disconnector
The GW4-126kV series outdoor high-voltage disconnect switch is an outdoor high-voltage electrical equipment for 50Hz three-phase alternating current.
Outdoor high-voltage SF6 circuit breaker type LW36-72.5 126
The high-voltage autogas SF6 circuit breaker LW36-72.5/126(G) is designed for use in AC power systems with a frequency of 50 Hz and a voltage of 110 kV.
Outdoor high voltage disconnect switch GW4-40.5 series
This series of high voltage disconnectors is a new type of switching device, modernized and designed by our factory in accordance with current national and international standards to eliminate some of the problems inherent in the previous GW4 disconnectors.
Complete pole switch with integration of primary and secondary equipment type ZW32-12
The complete pole switch with the integration of primary and secondary equipment (ordinary pole type) complies with the requirements of the standardized design scheme set forth in Document No. 151 of the Equipment Department of the State Grid Corporation of China.
CFS6-12-40.5 Series High Voltage SF6 Outdoor Load Switch
This series of pole-type outdoor load switches is a new type of switchgear developed by our company for end-users of electricity 12/24/40.5 kV and below, capacitor reactive power compensation plants, as well as small generating enterprises.
Combined withdrawable device with vacuum contactor and fuse VCNR-12 series
This series of products is a three-phase high-voltage indoor switching equipment with a rated operating voltage of the main circuit of 7.2 kV and 12 kV, frequency 50-60 Hz.
GW9-12 Series Outdoor High Voltage Disconnector 24 40.5
This series of outdoor high-voltage disconnect switches are 50Hz single-phase AC high-voltage switching equipment designed for use in electrical systems with a rated voltage of 10-35kV for switching on or isolating the power supply when no-load voltage is present.
Wind generation in low winds
Chenno company presents vertical wind generators of the CZF1 series with a power from 5 to 100 kW. The devices are suitable for powering urban and rural homes, ports, highway rest areas and remote areas without access to the network.
JCZ8C-12 Series High Voltage Vacuum Contactor
This series of high-voltage vacuum contactors is equipped with specialized vacuum arc chutes designed for switching capacitor banks that have undergone high-current training.
High Voltage Vacuum Contactor JCZ9-40.5kV
This series of 40.5kV high voltage vacuum contactors is developed by our company in accordance with the market requirements.
High voltage vacuum circuit breaker support type ZW32-40.5
The pole switch with the integration of primary and secondary equipment ZW32-40.5 (measurement and control device, comprehensive fault isolation) (hereinafter referred to as the “switch”) is an outdoor distribution equipment used at a voltage of 40.5 kV, three-phase alternating current 50 Hz.
High-voltage neutral grounding switch for outdoor installation, GW13-12 series 20 35 66 110
The GW13 series outdoor neutral grounding device is mainly used in electrical systems of voltage classes from 12 kV to 110 kV as a grounded transformer neutral protection device.
-
-
-
-
-
-
whatsapp
-
WeChat
