Products
Wind generation in low winds
Chenno company presents vertical wind generators of the CZF1 series with a power from 5 to 100 kW. The devices are suitable for powering urban and rural homes, ports, highway rest areas and remote areas without access to the network.
Description
marker
Product Description
Chenno company presents vertical wind generators of the CZF1 series with a power from 5 to 100 kW. The devices are suitable for powering urban and rural homes, ports, highway rest areas and remote areas without access to the network.
Wind generators start up at a wind speed of only 1.4 m/s. Thanks to the vertical axis, they perceive the wind at any angle (360°). The wind energy utilization rate reaches 85%. The annual effective generation time is from 5500 to 6500 hours, which is 2-3 times higher than traditional wind turbines and solar panels.
The blades are made of corrosion-resistant aluminum alloy. The generator is brushless with a synchronous reluctance motor (SR). The device is resistant to high and low temperatures and has a protection degree of IP55. Estimated service life is 25 years. The noise level is below 50 dB, which makes it environmentally friendly.
The system includes a vertical wind generator, a main generator, an intelligent control system and a battery pack. Protective functions are provided: electromagnetic braking when overspeeding, protection against overvoltage, overcurrent and overheating. The output voltage is 400–760 VDC supported, and can be manufactured with other parameters. Grid-connected inverters and off-grid storage systems are available.
The modular flange design simplifies installation, requires minimal space and has long service intervals. The full payback period is only 2–3 years, which is significantly better than traditional renewable energy sources.
The equipment operates in a wide temperature range from –30 °C to +50 °C. The tower can withstand hurricane force winds of up to 12 points. Standard installation and routine maintenance instructions are provided. Equipment warranty is 5 years, 24/7 technical support is available. Wind generators are suitable for various projects in the field of green energy: autonomous power supply for houses, commercial power supply, power supply for isolated objects.
contact us
Related Popular Products
Outdoor high voltage disconnect switch GW5-40.5 series
This series of high voltage disconnectors is a new type of switching device, modernized and designed by our factory in accordance with current national and international standards to eliminate some of the problems inherent in the previous GW5 disconnectors.
Portable power stations 2
The XM83A-1500W portable power station is a pure sine wave output device. Rated power - 1500 W, peak - 2000 W. Efficiency - no less than 87%. Supports switching to 220 V (can be manufactured for 110 V) and a frequency of 50/60 Hz. Signal shape distortion - no more than 5%.
Vacuum contactors JCZ1-JCZ8C-24 kV series
This series of high voltage vacuum contactors adopts high quality vacuum arc chutes combined with metal frame and insulation supports to provide superior breaking performance.
High voltage SF6 circuit breaker LW36-252 kV
The LW36-252 high-voltage autogas gas circuit breaker is designed for use in AC power systems with a frequency of 50–60 Hz and a rated voltage of 252 kV.
High-voltage reactive power compensation device for pole-mount lines XBZW-10 series
This series of products is widely used in automatic devices for reactive power compensation of outdoor installations on 10 kV lines.
Complete pole switch with integration of primary and secondary equipment type ZW32-12 (deep integration)
The complete pole switch with the integration of primary and secondary equipment (support type with deep integration) complies with the requirements of the standardized design scheme set out in Document No. 151 of the Equipment Department of the State Grid Corporation of China.
High-voltage SF6 circuit breaker for outdoor installation type LW36-40.5
Outdoor high-voltage SF6 circuit breaker LW36-40.5/1250A-2000A is a high-voltage electrical equipment for outdoor installation of three-phase alternating current 50Hz.
JCZ8G-12 Series High Altitude Vacuum Contactor
This series of high voltage vacuum contactors for high mountain areas is developed by our company in accordance with market needs. The contactors are equipped with high quality military grade vacuum arc chutes.
GW4-12 Series Outdoor High Voltage Disconnector 15
This series of outdoor high-voltage disconnect switches is an outdoor high-voltage electrical equipment for 50Hz three-phase alternating current.
FZNS16-12 Series Indoor Permanent Magnet Vacuum Load Switch
This series of permanent magnet vacuum load break switches adopts high quality vacuum arcing load chambers and is equipped with the most advanced bistable magnetic drives as the main driving element.
Outdoor high voltage disconnect switch GW4-72.5 series
This series of outdoor high-voltage disconnectors is a new type of switching device that has been upgraded and designed by our factory in accordance with current national and international standards to eliminate some of the problems inherent in the previous GW4 disconnectors.
Outdoor high-voltage vacuum circuit breaker type ZW7-40.5
This series of high-voltage vacuum circuit breakers for outdoor installation has such advantages as safety and reliability in operation, ease of maintenance, and a long turnaround time.
Low-voltage commercial metering point with prepayment
This product is intended for use in low-voltage distribution lines with a rated frequency of 50 Hz, transformer power 20-315 kVA, rated voltage 400 V and below for prepayment and metering control purposes.
Indoor Vacuum Load Switch FZ(R)N35-40.5 Series
Combined device - indoor high voltage vacuum load switch with fuse (hereinafter referred to as combined device) is a switching equipment specially designed for new energy fields such as wind power and photovoltaic power.
CKJ20 Series Low Voltage Vacuum Contactor
This series of vacuum contactors is designed for use in AC electrical networks with a frequency of 50–60 Hz with a rated main circuit voltage of up to 2 kV and a rated current of 160 A, 250 A, 400 A, 630 A, 800 A, 1000 A to 1250 A.
CFS6-12-40.5 Series High Voltage SF6 Outdoor Load Switch
This series of pole-type outdoor load switches is a new type of switchgear developed by our company for end-users of electricity 12/24/40.5 kV and below, capacitor reactive power compensation plants, as well as small generating enterprises.
-
-
-
-
-
-
whatsapp
-
WeChat
