Products
Modular storage energy unit for home
Changzheng New Energy Company presents the CZ100-JC05I modular energy storage unit for home use. The rated power is 5 kW, the capacity is 5.36 kWh. The device uses lithium iron phosphate cells. Charge-discharge efficiency is at least 95%. The life cycle at a discharge depth of 80% reaches 6000 cycles. The system is suitable for home power backup, off-grid systems and for arbitrage under variable electricity tariffs.
Description
marker
Product Description
Changzheng New Energy Company presents the CZ100-JC05I modular energy storage unit for home use. The rated power is 5 kW, the capacity is 5.36 kWh. The device uses lithium iron phosphate cells. Charge-discharge efficiency is at least 95%. The life cycle at a discharge depth of 80% reaches 6000 cycles. The system is suitable for home power backup, off-grid systems and for arbitrage under variable electricity tariffs.
Charging voltage - 58.4 V, shutdown voltage during discharge - 42 V. Operating temperature range: -10 °C to +65 °C. Degree of protection - IP21. Dimensions: 548 × 492 × 525 mm (including wheels), weight - 87 kg.
The device is equipped with an intelligent battery management system (BMS), which provides protection against overcharge, deep discharge, overcurrent, short circuit and overheating. Supported operating modes: networked, standalone and hybrid.
The case is equipped with: LCD display, LED status indicators and multifunction buttons. Interfaces included: solar panel (PV) input, AC and DC input/output, Wi-Fi, RS485/CAN, USB, and dry contacts. Through the display you can monitor the charge level, power, equipment status and configure communication parameters.
Installation must be carried out by a qualified electrician in accordance with regulations. The device should be placed in a well-ventilated, dry area. Regular inspection and cleaning is recommended. For long-term storage, the charge level should be about 50%.
The product comes with a warranty. In case of malfunction, please call the hotline: 400-616-5258. The warranty does not cover damage caused by user actions or force majeure.
contact us
Related Popular Products
Wall mounted battery for home
Changzheng New Energy Company presents a wall-mounted storage battery for home based on lithium iron phosphate with a voltage of 57.6 V and a capacity of 86 Ah. The capacity of one module is 4.953 kWh. Parallel connection of several modules is supported to expand the energy storage system up to 10–30 kWh. The battery is compatible with solar panels and inverters, providing backup power for household needs.
Outdoor high-voltage vacuum circuit breaker type ZW7-40.5
This series of high-voltage vacuum circuit breakers for outdoor installation has such advantages as safety and reliability in operation, ease of maintenance, and a long turnaround time.
Combined withdrawable device with vacuum contactor and fuse VCNR-12 series
This series of products is a three-phase high-voltage indoor switching equipment with a rated operating voltage of the main circuit of 7.2 kV and 12 kV, frequency 50-60 Hz.
Outdoor high voltage disconnect switch GW5-40.5 series
This series of high voltage disconnectors is a new type of switching device, modernized and designed by our factory in accordance with current national and international standards to eliminate some of the problems inherent in the previous GW5 disconnectors.
CNK9-12 Series High Voltage High Speed Magnetic Controlled Vacuum Circuit Breaker (Zero Crossing Switching)
The high-speed vacuum circuit breaker with magnetic drive and synchronized zero-cross switching is a key new generation switchgear that combines magnetic technology, synchronized zero-cross switching technology and vacuum arc suppression.
High-voltage commercial metering station with prepayment type JLZW
This device consists of a high-voltage vacuum circuit breaker type ZW43-12Y, an integrated combined metering station and a prepayment meter control cabinet.
High voltage vacuum circuit breaker support type ZW32-40.5
The pole switch with the integration of primary and secondary equipment ZW32-40.5 (measurement and control device, comprehensive fault isolation) (hereinafter referred to as the “switch”) is an outdoor distribution equipment used at a voltage of 40.5 kV, three-phase alternating current 50 Hz.
Outdoor high voltage disconnect switch GW4-72.5 series
This series of outdoor high-voltage disconnectors is a new type of switching device that has been upgraded and designed by our factory in accordance with current national and international standards to eliminate some of the problems inherent in the previous GW4 disconnectors.
Outdoor high-voltage SF6 circuit breaker type LW36-72.5 126
The high-voltage autogas SF6 circuit breaker LW36-72.5/126(G) is designed for use in AC power systems with a frequency of 50 Hz and a voltage of 110 kV.
JCZ8G-12 Series High Altitude Vacuum Contactor
This series of high voltage vacuum contactors for high mountain areas is developed by our company in accordance with market needs. The contactors are equipped with high quality military grade vacuum arc chutes.
Portable power stations 3
Portable power station 55A-2500W based on lithium iron phosphate prismatic cells. Capacity 2.71 kWh, weight 29.94 kg, dimensions 480x278x280 mm.
High Voltage High Speed Magnetic Controlled Vacuum Circuit Breaker CNK8 Series
The high-voltage magnetic drive high-voltage vacuum circuit breaker is a key new generation switchgear that combines magnetic drive and vacuum arc extinguishing technology.
High-voltage indoor disconnector type GN24-12
The GN24-12 series indoor high-voltage disconnector is designed for use in 50 Hz AC circuits with a rated voltage of 10 kV to open and close the circuit in the presence of voltage without load current.
JCZ8C-12 Series High Voltage Vacuum Contactor
This series of high-voltage vacuum contactors is equipped with specialized vacuum arc chutes designed for switching capacitor banks that have undergone high-current training.
Pneumatic indoor load switch FK(R)N12-12 series
The pneumatic load switch FKN12-12D and the combined device - pneumatic load switch with fuse FKRN12A-12D series are designed for use in three-phase distribution systems of 12 kV and below as control and protection devices for transformers, cables, overhead lines and other power equipment.
Indoor Vacuum Switch Switch FZ(R)N25-12 Series
The indoor high voltage AC vacuum load switch type FZN25-12D (hereinafter referred to as the load switch) and the combined device - indoor high voltage AC vacuum load switch with fuse type FZRN25-12D (hereinafter referred to as the combined device) are control and protection devices in three-phase AC 50 Hz, 12 kV distribution systems.
-
-
-
-
-
-
whatsapp
-
WeChat
