Products
Dry measuring box with combined measuring transformer type JLSV-10 35
This series of 10 kV, 35 kV products is made using the method of complete vacuum filling with imported resin for external use and combines a voltage transformer and a current transformer in a single housing.
Description
marker
Product Description
This series of 10 kV, 35 kV products is made using the method of complete vacuum filling with imported resin for external use and combines a voltage transformer and a current transformer in a single housing. Designed for use in electrical systems with a nominal frequency of 50 Hz, rated voltage of 10 kV, 35 kV and below, available in two-element and three-element versions. In products of this type, the current transformer is made of a high-quality nanocrystalline core with high magnetic permeability. The voltage transformer is made on an R-shaped core made of high-quality oriented silicon steel with high magnetic permeability, made in Japan Z11. Transformers are optimized in location and filled in one cycle in a vacuum; At the bottom there is a mounting channel and grounding bolts, as well as eye bolts for rigging. High-voltage lines are connected through primary busbar inputs, secondary circuits can be directly connected to the meter via armored cable. The product has a compact design, small dimensions, does not require maintenance, is easy to install, and has an aesthetic appearance.
contact us
Related Popular Products
Complete pole switch with integration of primary and secondary equipment type ZW32-12
The complete pole switch with the integration of primary and secondary equipment (ordinary pole type) complies with the requirements of the standardized design scheme set forth in Document No. 151 of the Equipment Department of the State Grid Corporation of China.
Portable power stations 1
The 73A Series Portable Power Station comes in two models of 1000W and 2000W with pure sine wave output. Peak power is up to 2000 W and 4000 W, respectively. Output efficiency is at least 87%. Supports switching between 110/220 VAC. current and 50/60 Hz. Waveform distortion is less than 5%.
High voltage vacuum circuit breaker ZN63A(VS1)-12
The VS1-12 indoor high-voltage vacuum circuit breaker (also known as ZN63A-12) is designed for use as a complete indoor switchgear in 50 Hz AC power networks with a voltage of 3-10 kV.
High voltage vacuum circuit breaker ZW32-33F
The ZW32-33F series outdoor high voltage vacuum circuit breaker is designed for use in 50Hz AC three-phase electrical systems with a rated voltage of 33kV for switching load current, overload current and short-circuit current.
High Voltage Vacuum Contactor JCZ9-40.5kV
This series of 40.5kV high voltage vacuum contactors is developed by our company in accordance with the market requirements.
Liquid ultra-fast chargers
The Changzheng New Energy company's own development is the liquid ultra-fast charger CZ-800V/600A. Peak power is 480 kW, in 10 minutes the power reserve is replenished by 400 km. The device has an IP65 protection rating and a CQC five star safety certificate. Suitable for fast charging of all types of passenger and commercial vehicles.
Outdoor high voltage disconnect switch GW5-40.5 series
This series of high voltage disconnectors is a new type of switching device, modernized and designed by our factory in accordance with current national and international standards to eliminate some of the problems inherent in the previous GW5 disconnectors.
Low-voltage commercial metering point with prepayment
This product is intended for use in low-voltage distribution lines with a rated frequency of 50 Hz, transformer power 20-315 kVA, rated voltage 400 V and below for prepayment and metering control purposes.
High Voltage Vacuum Switch with Permanent Magnets for Switching Capacitors ZN3A-ZNT3
This series of high voltage magnetic drive vacuum circuit breakers is equipped with high quality vacuum arc chutes, as well as advanced and reliable bistable magnetic drive and intelligent controller.
High voltage vacuum circuit breaker ZN85-40.5 kV
The high-voltage vacuum circuit breaker for indoor installation ZN85-40.5 (hereinafter referred to as the circuit breaker) is intended for use in three-phase alternating current electrical power systems with a frequency of 50 Hz and a rated voltage of 40.5 kV.
CKJ5 Series Low Voltage Vacuum Contactor
This series of vacuum contactors is designed for use in AC electrical networks with a frequency of 50–60 Hz with a rated main circuit voltage of up to 1.6 kV and a rated current of 160 A, 250 A, 400 A and 630 A.
GW9-12 Series Outdoor High Voltage Disconnector 24 40.5
This series of outdoor high-voltage disconnect switches are 50Hz single-phase AC high-voltage switching equipment designed for use in electrical systems with a rated voltage of 10-35kV for switching on or isolating the power supply when no-load voltage is present.
Wind generation in low winds
Chenno company presents vertical wind generators of the CZF1 series with a power from 5 to 100 kW. The devices are suitable for powering urban and rural homes, ports, highway rest areas and remote areas without access to the network.
Pneumatic indoor load switch FK(R)N12-12 series
The pneumatic load switch FKN12-12D and the combined device - pneumatic load switch with fuse FKRN12A-12D series are designed for use in three-phase distribution systems of 12 kV and below as control and protection devices for transformers, cables, overhead lines and other power equipment.
High-voltage neutral grounding switch for outdoor installation, GW13-12 series 20 35 66 110
The GW13 series outdoor neutral grounding device is mainly used in electrical systems of voltage classes from 12 kV to 110 kV as a grounded transformer neutral protection device.
ZW7C-40.5 Series Outdoor High Voltage Vacuum Circuit Breaker (Compact)
The ZW7c-40.5 series outdoor high-voltage AC vacuum circuit breaker (hereinafter referred to as the “breaker”) is a high-voltage outdoor switching equipment of three-phase 50Hz alternating current.
-
-
-
-
-
-
whatsapp
-
WeChat
